78-Inch Shower Threshold Dam Barrier, Self-Adhesive Foldable Shower Water Guard, Easy to Separate Dry and Wet (Semitransparent)

This 78-inch shower threshold dam can be pasted on flat and smooth tiles, glass, plastic, metal, and ceramic materials.Installation method: 1. Thoroughly clean the surface of the installation site and keep it dry. ( This is very important)2. Determine the installation location and mark it with a pen.3. Use a sharp knife to cut out the required length. (Please note that the pre-cut or trim length of the dam cannot be returned) 4.Tear off the outer skin of the tape, and then place it to the marked position and gently press it. If the weather is relatively cold, you can use a hairdryer to heat the tape to obtain better adhesion.5. Fill the gap with sealed silicone, And remove the excess silica gel, leaving a smooth filling line.6. The sealing silica gel needs to dry after 24 hours, so it is not allowed to move or touch water within 24 hours.