uxcell 1640-2RS Deep Groove Ball Bearings Z2 7/8 X 2 X 9/16inch Double Sealed Chrome Steel 2 Pcs

NOTE：Please refer to the picture and select right type of bearings before your order (Sealed or Shield on BOTH or SINGLE side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product.Description:Single-row, pre-lubricated, normal accuracy.Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions.With small friction and high-limit speed, Ball Bearings are cost-effective and require little maintenance.These cost-effective bearings are widely used in areas with low requirements for Mohs hardness.Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on.Selecting Guide:Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris.Sealed (Designation Suffix RS/2RS) - Made of sheet steel reinforced nitrile butadiene rubber (oil- and liquid-resistant). Lower limit speed than Shield Bearings.Specification:Model: 1640-2RSSeal Type: Double SealedInner Race/Outer Race Material: Chromium Steel (GCr15)Cage Material: Stamping SteelInner Diameter (d): 7/8inchOuter Diameter (D): 2inchThickness (B): 9/16inchDynamic Load Rating (Cr): 2265NStatic Load Rating (Cor): 1315NAccuracy Class: P0 (ABEC-1)Noise Level: Z2Number of Pack: 2 Pcs