iPhone 16 Pro Ear Speaker Replacement: Fix Muffled Call Audio

Video Description

Replace the iPhone 16 Pro ear earpiece speaker to fix muffled or distorted call audio. Buy tools and parts on AMAZON: Screwdriver Set: https://hfixt.com/mpro Pro Toolkit: https://hfixt.com/tool Magnetic Mat: https://hfixt.com/mat Tweezers: https://hfixt.com/tzrs Global AliExpress: Screwdriver Set: https://hfixt.com/alis Opening Tool Kit: https://hfixt.com/alit Magnetic Mat: https://hfixt.com/amat Tweezers set: https://hfixt.com/altz Adhesive Tape: https://s.click.aliexpress.com/e/_DFW4sHf Speaker: https://s.click.aliexpress.com/e/_olJSeQR 📌*Useful links* Best Screwdriver Set: https://youtu.be/fdtNem4rDDM Repair Tools & Safety Tips: https://youtu.be/Sp7PhrKV-vQ More DIY repair guides: https://how-fixit.com 📱Follow us for more tech tips and guides! TikTok: https://www.tiktok.com/@howfixit Instagram: https://www.instagram.com/howfixit/ Facebook: https://www.facebook.com/HowFixit/ X: https://x.com/HowFixit *Description* If callers sound quiet, muffled, or distorted on your iPhone 16 Pro, the ear speaker (earpiece) may have failed. In this HowFixit guide, I show the full replacement: safe back-glass opening, disconnecting the cables, swapping the ear speaker, testing, and restoring water resistance with new adhesive. Chapters below help you jump to each step. If this helped, like & subscribe for more DIY repair guides. Timecodes: 00:00 Intro — symptoms & fix overview 00:22 Tools & parts checklist (iPhone 16 Pro earpiece) 01:05 Power off & remove two pentalobe screws 01:15 Heat back glass to 90 °C — soften adhesive 01:33 Separate back glass 03:29 Disconnect back-glass and battery cables 04:03 Remove earpiece speaker screws 04:28 Remove earpiece speaker 04:55 Install new ear speaker 05:08 Reassemble phone & reconnect cables 05:31 Test call audio — clear, balanced sound check 06:19 Restore water resistance — clean & apply new tape 09:55 Final check & outro 🌟FAQ: Why is my iPhone 16 Pro earpiece quiet or muffled? Dust, moisture, or a failing ear speaker module can cause distortion. If cleaning didn’t help, replacement is the fix. Will this affect water resistance? Opening breaks the seal. Apply fresh waterproof adhesive tape to help restore resistance after reassembly. Do I need special screwdrivers? Yes: Pentalobe 0.8 mm, Tri-Wing 0.8 mm, and Phillips 1.0 mm are required. How hot should I heat the back glass? About a minute with a hair dryer or a heat gun set to ~90 °C to soften adhesive—avoid overheating. Does this repair affect Face ID? The procedure targets the ear speaker only. Handle nearby flex cables carefully to avoid damage. What if the sound is still distorted after replacement? Check the connector, reseat the speaker, inspect for debris, and test with another call. If unchanged, the audio IC or flex may be at fault. AFFILIATE PROGRAM As an Amazon Associate, I earn from qualifying purchases. #iphone16pro #iphonerepair #diyrepair #howfixit