Is This REAL Carbon Fiber 3D Printing?

Video Description

Check out the @Fibreseek3D FibreSeeker 3D: https://fibreseeker-3.kckb.me/aad4a5d3 (affiliate link) Thanks to FibreSeek for sponsoring this video! ------------------------------------------------------------------------------------------------------------ I finally got to test continuous carbon fiber 3D printing on the FibreSeeker 3. I printed a few real workshop projects, then pushed everything to the limit with a strength pull test using PLA, ABS, PPS-CF, PETG-CF, and continuous carbon fiber versions of the same part. This is not a lab-grade tensile test, but it does show how these materials behave under real load in a real shop. Some prints snapped instantly, some stretched, and the continuous carbon fiber version landed in a completely different category. I also share my honest experience using this beta machine, what went well, what needs improvement, and what the technology gets right. ------------------------------------------------------------------------------------------------------------ Mandic Labs 2.0 is supported by: 🔥 Prusa3D – http://www.prusa3d.com/#a_aid=MandicReally 🛠️ PCBWay – https://pcbway.com/g/k66yI7 Check out more MandicReally projects, merch, and ways to support the channel: 🌐 https://www.mandicreally.com/links 🙏 Special thanks to @multiboard_io for supporting the studio as well! : https://than.gs/u/234635?affiliateCode=mandicreally ------------------------------------------------------------------------------------------------------------ 🛒 Featured Products & Recommendations (Affiliate Links): *** Fibre Seeker 3: https://fibreseeker-3.kckb.me/aad4a5d3 ------------------------------------------------------------------------------------------------------------ 🎥 My Filming Gear (Affiliate Links): Main Camera – https://bhpho.to/3RStTnz Main Lens – https://bhpho.to/4avDFmt Video Recorder – https://bhpho.to/3Oa4qmZ Action Cam – https://bhpho.to/45CS10Q Wide Lens – https://bhpho.to/3RXQXBj Motorized Slider – https://bhpho.to/48YMmnD Studio Mic – https://bhpho.to/4216F1z Voiceover Mic – https://bhpho.to/46uECsE Monopod – https://bhpho.to/3PT2yir Tripod – https://bhpho.to/3PSKXY4 Primary Lighting – https://bhpho.to/3RXSmb3 Accent Lighting – https://bhpho.to/3RXVfsf RGB Lights – https://bhpho.to/3S77IbO Drone – https://bhpho.to/423XrS6 ------------------------------------------------------------------------------------------------------------ 🧪 These are my real-world opinions based on hands-on use. Some links are affiliate links, which means I may earn a small commission—at no extra cost to you. Not a paid endorsement unless explicitly stated in the video. ------------------------------------------------------------------------------------------------------------ ⏱️ TIMESTAMPS: 00:00 - Intro 00:41 - The FibreSeeker 3! 02:03 - Jack Stands 03:46 - Desinging for Carbon Fiber 04:20 - Jack Stand Hanging 05:26 - Let's Light This Sucker! 06:45 - Intelligent Slicer 07:15 - Printing Carbon Fiber 09:09 - Carbon Printing Results 09:28 - Light Mount Assembly 09:50 - Light Install 10:58 - Testing Carbon Fiber Printing! 12:00 - Testing Methodology 12:41 - TRUCK GO VROOM! 14:22 - What did we test? 14:51 - Truck Test Results 15:57 - Truck Test Number TWO! 17:03 - Beta Machine & Kickstarter 17:45 - Fibre Seek Cares 18:20 - Machine Updates & Issues 20:57 - It is a NORMAL 3D printer too! 21:26 - Who is the Fibre Seeker 3 for? 22:23 - Outro #mandicreally #fibreseeker3 #3dprinting