Grafana Weather Dashboard on a Raspberry Pi using InfluxDB and an ESP32 - In-Depth Tutorial

Video Description

Following one of my previous projects where I built a weather station dashboard on the reTerminal, I had quite a few requests to do a more in-depth tutorial on how to get each part set up and running. So in this tutorial, I’m going to be going through each part of the process, step-by-step, so that you can get a similar setup running on your Raspberry Pi. ADDITIONAL INFORMATION --------------------------------------------------- Visit my blog for the full written tutorial - https://www.the-diy-life.com/grafana-weather-dashboard-using-influxdb-and-an-esp32-in-depth-tutorial/ PURCHASE LINKS --------------------------------------------------- Raspberry Pi 4b (A Pi 3b/Pi 400/CM4 can also be used) - https://amzn.to/3dYeVqg Power Supply - https://amzn.to/3EhPts8 ESP32 Microcontroller - https://amzn.to/3obvOV7 MicroUSB Cable - https://amzn.to/32oxy54 Grove Sensor's From Beginner Kit - https://amzn.to/31my42U Breadboard - https://amzn.to/3lnrqAB Breadboard Jumpers - https://amzn.to/3xFop3f Equipment Used Portable Monitor (Shown at the end) - https://amzn.to/3n4Lk3X Some of the above parts are affiliate links. By purchasing products through the above links, you’ll be supporting this channel, with no additional cost to you. CHAPTERS --------------------------------------------------- 0:00 Intro 0:55 Setting Up The ESP32 & Sensors 2:45 Sending Our Sensor Data To InfluxDB 6:35 Creating Our InfluxDB Database 11:06 Installing Grafana On Our Raspberry Pi 14:45 Creating Our Weather Dashboard 18:01 Resizing The Dashboard For Fullscreen Mode 18:35 Final Thoughts If you've got any ideas for Raspberry Pi, Arduino, or other Electronics projects or tutorials you'd like to see, let me know in the comments section. #influxdb #raspberrypi #grafana #esp32