Mowing Tall Grass Was DOUBLE HARDER for Me When I Worked on a HOT DAY

Video Description

This time, one of my clients asked me to help tidy up his relatives' yard. I had to remove weeds from the parking lot, mow the overgrown lawn, and trim a few bushes. For this job, I brought along my Tielbürger TW50s, a machine for removing weeds from paving stones, but since some of the stones had a painted coating, I decided to use the new plastic brushes that I had brought along beforehand. After installing the brushes, I decided to try them out. After 10 minutes of work, I realized that they were practically useless, so I replaced them with metal brushes again, and only then did I see the results of my work. Moreover, my fears about scratching the paving stones were unfounded, so I boldly cleared the entire driveway and parking lot of weeds, then immediately blew everything away. Next, using a grass trimmer, I finished up where the weed remover couldn't reach, and also mowed the grass near the bushes and fence. Then I started mowing the tall grass with a lawn mower, but before that I removed the grass catcher, as it is easier to mow without it. When I had mowed everywhere, I collected all the cut grass in bags and then started mowing with the grass catcher. Despite the light breeze, the weather was very hot, around 30°C, and I even felt like I was about to collapse from exhaustion, so I decided to take a short break to drink something. At the end of the work, I started trimming the bushes, as the hedges had already been trimmed before my arrival, and after that I also collected all the clippings in green bags and blew them away with a backpack blower. This yard took me about 4 hours of work and 4 full green bags.